Jeep Backhoe and Dozer

http://blog.willysjeep.com/wp-content/uploads/2010/03/bhsmall.jpg bigger photo

The model 8-BH Backhoe for the Willys CJ5 model was a hydraulically operated device which attached to the small bed of the Jeep. It carried outrigger pads for stability and featured bucket widths of 12″ -20″ with replaceable teeth. It did require the 7000 # dual rear wheel axle to support it along with full length frame reinforcement. It was manufactured by Go- For-Digger Company with offices in Toledo,Oh and Hawthorne ,Ca.

This unit could dig to a depth of 8 feet and had a side to side swing of 170 degrees. It utilized a six spring clutch plate and feramic clutch disc for long life. Its dual hydraulic pumps had a top capacity of 11 gallons per minute at a low 100 rpm’s. The use of two pumps was purportedly the latest design to provide greater efficiency at lower maintenance costs.

It used the smaller one to control side swing and downriggers while the large one was dedicated to the bucket itself.

This was quite the apparatus to be carried on the modified CJ5 with its F-134 and 3 speed transmission. As it was a self transported machine, the savings over another hauler/trailer could be substantial.

http://blog.willysjeep.com/page/2/

http://blog.kaiserwillys.com/gpw-customer-photos/

JEEP PARTS FOR ORDERING REPAIRS

Jeep Wrangler TJ Body Parts

http://www.jeep4x4center.com/jeep-body-parts/wrangler-tj.htm

http://www.jeep4x4center.com/jeep-axle-differential-parts/dana44-rear-cj-willys.htm

Trailers

http://www.jeepforum.com/forum/f104/post-your-jeep-trailers-offroad-trailer-pics-here-569561/index2.html
DUMPERS, Great for declogging and landfilling operations
LOCKS
CONTROL LEVERS

http://varozza4x4.com/jeeptrailers.aspx
http://bantamt3c.com/images/hubbard/Pages/Bantam3.html
Specification Result
Body type Cargo
Weight Net (lb.) 550
Weight Payload (lb.) 500 (Offroad spec.)
Weight Gross (lb.) 1050
Loading height (in.) 22
Ground clearance (in.) 12.5
Tread (in.) 49
Tires Ply 6
Tires Size 6.00 x 16
Brakes Hand parking only
Towing tractor Truck, 1/4-ton and 3/4-ton, 4 x 4
Shipping dimensions (cu. ft.), (sq. ft.) 141, 42
Trailer will float with 500 pound load,
with 6 inches freeboard
http://bantamt3c.com/images/hubbard/Pages/Bantam4.html

http://www.team-bhp.com/forum/4x4-technical/61668-raising-jeeps-ground-clearance-options.html

http://www.ajeepthing.com/how-4wd-works.html

http://auto.howstuffworks.com/four-wheel-drive.htm

http://en.wikipedia.org/wiki/Four-wheel_drive

JEEP EVOLUTION

http://www.traildoors.com/photo4.html

http://www.valleyautorecycling.com/rich_text_1.html
Olongapo City Subic Bay Passenger Jeep

Military Jeeps in Subic Bay (1947)

waterproofing

Why a snorkel? Cause you never know how deep that creek is.... and once you are in, it is too late. Taking in water through the air intake can hydraulic an engine which leads to bent and thrown rods. We know this as we had our engine blow up on the way back from Rubicon once after taking an unexpected deep drop.

Our snorkel clad vehicle deep in the swamp of the Four wheeler magazine Top Truck Challenge.... Tank Trap!!!

It also came in handy during the 97' Top Truck Challenge hosted by Four Wheeler magazine. We found ourselves in a swamp over 4' deep. The snorkel saved the day and our engine. Not to mention.... the judging staff thought the snorkel just plain looked awesome!

Other benefits of the snorkel are performance related. The snorkel installation on the XJ America page noted improved power and gas mileage after installation.... when they were expecting opposite results. This due to the ram-air effect the snorkel has on feeding your intake (kinda like how a supercharger works, only not as forceful). Your engine also breathes cooler air from outside of the vehicle which produces more efficient power.

http://www.safarisnorkel.com/guides/JEEP/ss1060hf/ss1060hf_guide.htm


tire pumps

power inverters

first aid kit

fire extinguishers

encase engine block to reduce water flooding

place a water pump with sensor to auto start pump once floodwater gets in

http://www.valleyautorecycling.com/rich_text_1.html

snorkel

http://www.davesport.com/cgi-bin/davesport/SS1000HF.html



http://www.toyotacorollamodifications.com/jeepsnokel.htm

http://www.victorycars.com/inventory_details.asp?offset=30&InventoryNum=863

Bigfoot Off-Road & Performance Center and Off-Road Park

Tim Gibson's '94 Wrangler was running full-width 1-ton axles with 4.56 gears and made mincemeat of the hills in the park. The 35-inch Swampers made the needed traction, while the Holley Truck Avenger carb-equipped Chevy big-block took care of the torque. A TH400 auto and NP205 transfer case chose the gears, while leaf springs did the twisting. View Related Article

List of the currently installed mods top to bottom:

- Mopar OEM Lightbar. - 4X100W KC Hi-Lites. - Rugged Ridge Headlamp guards. - Rugged Ridge Tail light guards. - Mopar OEM Soft top. - Bestop Bikini Top. - Mopar OEM front fog lamps. - Mopar OEM TowHitch. - 4" Skyjacker Jeep Wrangler standard lift kit w/T-Case lowering kit. - Skyjacker Softride Nitro/8000 shocks. - Skyjacker Hydro/7000 steering stabilizer. - Bushwacker 6" Pocket Style fender flares. - 33"X12.5" Hankook Dynapro MT/R Tires. - 15"X10" Racing Design Daytona4X4 polished rims.

93 Wrangler Jeep with 6inch Skyjacker lift

This is an awesome, never been in an accident ,1993 Jeep Wrangler Sport! It's an extreme offroader able to handle anything as well as a great highway vehicle. Here's why;

1. I'm the second owner and it has been my daily driver and have owned it since 1996.

2. It has the 4.0L straight six with a 5 speed manual.

3. Has a 4 inch Skyjacker suspension lift and a 2 inch shackle lift.

4. "456" gears in both front and rear differentials (pumpkins).

5. ARB lockers in both front and rear with the adapter to fit a hose to fill all four tires.

6. B&M "Short Throw" Shifter

7. "Centerforce 2" clutch installed 200 miles ago.

8. ABS brakes

9. 33 inch BFG All Terrain TA/KO tires with 11/32 of tread on Jeep "Canyon" rims. Spare has never been used so it still at 15/32 of tread.

10. 4500LB "Superwinch" on front.

11. Custom made"Endo" bar in front with two roller fairleads for the winch so no cable binding or shaving can occur. Including 2 inch receiver hitch and two military "Warn" tow hooks. Made by Mack Industrial Welding Company.

12. Rear swing away bumper that was made to hold a "Hi Lift" jack. Including 2 inch receiver hitch and two military "Warn" tow hooks also custom made by Mack Industrial Welding Company.

13. On the hood mounted shovel and axe holder including the shovel and axe. Again, made by Mack Industrial Welding Company.

14. Custom made Air Intake Snorkel mounted onto a throttle body spacer with a K&N cone filter on top and an "Outerwears" waterproof cover to insure no moisture consumtion.

15. Hard Top with full doors.

16. Dug from my back yard real rocks as shifter knobs on both shifter.

17. "Rock It' skid plates on oil pan, both differentials, and steering gearbox.

18. 6 Speaker sound bar attached to an actual "Marine" boat radio.

19. "Otima Blue Top" battery.

20. Factory installed Air conditioning that works.



A lot of items and a fantastic Jeep for a little amount of money!

Shipping is on the buyer. Vehicle is turn key ready, like I said it is my daily driver and is able to drive across the U.S. with ease at a moments notice. Whether you choose the highway or as the crow flys, it'll get you there!